Refueling cycle
According to the search results, the refueling cycle of the slurry pump is usually once every six months. This cycle is suitable for specific types of slurry pumps, such as ZJ slurry pumps. The specific refueling cycle may vary according to different models and usage conditions, so it is recommended to refer to the maintenance manual of the specific equipment or the manufacturer's recommendation.
Precautions
During the refueling process, the following points need to be noted:
Oil inspection: The slurry pump has been injected with an appropriate amount of oil before leaving the factory to lubricate the mechanical seal. The oil should be checked once a year. If water is found in the oil, it should be drained, the oil should be replaced, the seal gasket should be replaced, and the screw plug should be tightened. After three weeks, it must be rechecked. If the oil becomes emulsified again, the mechanical seal should be checked3.
Selection of lubricating oil: Selecting the right lubricating oil is crucial for the lubrication of the slurry pump. Different slurry pumps may require different types of lubricating oil, so it should be selected according to the specific requirements of the equipment.
Refueling method: When refueling, you should strictly follow the instructions in the equipment maintenance manual to ensure that the lubricating oil is filled to the correct location and quantity. Too much or too little lubricating oil may cause pump operation problems.
Regular inspection: In addition to the oiling cycle, other parts of the slurry pump, such as bearings, sealing rings, etc., should also be checked regularly to ensure their normal operation.
